Skip to main content

Central locking casters Lock cam angle

  In order to meet user’s variety design requirement,we have two version 30 degree and 45 degree lock cam angle.
 
    For now most of our new clients are TENTE brand user,they purchase new central locking casters to replacement bed casters,or build new design medical devices. 
 
    So there are have another potential problem.All TENTE brand central locking casters are with 45 degree lock cam angle.Then you will also need purchase same lock cam angle from us. So can ensure our new central control casters can work on existing existing central lock system. 
 
    But if user are building a new design bed,then both 30 and 45 degree lock cam angle is OK, Just need adjust the lock pedal welding angle position.
 
Please check below photos as reference.
 
      
                 
Any question please contact us freely   www.casterwheelsco.com ; sales@casterwheelsco.com

Comments

Popular posts from this blog

Medical bed central brake system and casters

      In order to provide our clients one-stop service,we developed two series of medical bed central brake systems. Which include both  central locking caster wheels  and central brake control mechanical system.         Model 1: Link,Brake Pedal and central locking caster     Model 2: Die casting aluminum caster housing (support 60 x 30-2mm wall pipe) and link unit,hex rod,stamping bracket,brake bar,and central brake caster wheels.          Any interesting about our medical central brake system & central locking casters. Please contact us freely.        www.casterwheelsco.com ; sales@casterwheelsco.com

Wheelchair front casters and rear wheels

     We are now develop a new model of  wheelchair casters wheels . See below picture,  8 inch wheelchair front casters wheels  and  10 inch wheelchair rear wheels .        Wheel center with strong reinforce rib and made from good quality PP, And we adopt high quality polyurethane,that ensure entire wheel durable and can rotation at low noise.   Front wheel size : Ø200mm x 38mm wide, Rear wheel’s size :Ø254mm x 38mm wide.        Color option: Full black or black hub with Grey Tyre. Front wheelchair wheels fork can match M12x25 or M12 x 55 threaded stem. And current fork material is PA6,it can replace by aluminum fork as client needed.       www.casterwheelsco.com sales@casterwheelsco.com

Locking design analyze of central locking casters

As we know due to  central locking caster s   unique brake structure ,they are usually used as medical casters,such as medical bed,medical trolley,liner casters....   At current there are mainly have two types of central brake design.Press force brake,and Locking Gear Brake   Press force brake: The inner side of wheel surface pressed by the brake disc, the wheel locked by friction/pressure.   Advantages: simple structure, low cost   Defects:   1. The brakes will loose after a some time working,sometimes the brake can not lock wheel tightly or can not locked wheel anymore.   2.Need more strength to operate the lock cam, which affects the service life of the central control link system.     Locking gear brake: The wheel is locked through brake gear parts lock the inside gear of the wheel.   Advantage:   1. Once locked, it will not loose again   2. Less operate strength and long s...